Teltonika Tsw202 Din Rail Mountable Managed Poe+ Switch With 8 X 1gbps Eth-Ports And 2 X Sfp

Teltonika TSW202 DIN Rail Mountable Managed PoE+ Switch 8 x 10/100/1000 Mbps ETH-ports PoE+ switch with 2 x SFP.

The TSW202 is the first-ever Teltonika Networks managed PoE+ switch, designed to provide granular network management capabilities while centralizing power distribution. This PoE+ switch enables flexibility over solution management and power supply and enhances M2M communication by supporting a wide range of industrial protocols, including EtherNet/IP, Profinet, and MRP. The TSW202 has 2 high-performance SFP ports for long-range fibre optic communication and 8 Gigabit Ethernet ports providing 30 W of power each. Details Product code TSW202 Ethernet Multi-layer managed 8 x ETH ports, 10/100/1000 Mbps supports auto MDI/MDIX crossover Fibre 2 x SFP ports IEEE 802.3 series standards 802.3af, 802.3at, IEEE 802.1p, IEEE 802.1Q, 802.3az PoE ports Port 1 - 8 PoE standards 802.3af and 802.3at PoE Max Power per Port (at PSE) 30 W Total PoE Power Budget (at PSE) 240 W (DC input of 44 – 57 VDC required for PoE) Maximum Ethernet cable length 100 m Services EtherNet/IP, Profinet (class B), SNMP V2, V3, LLDP MRP MRP client role, MRP manager role L2 features Loop protection, Forwarding table, VLAN, STP/RSTP DHCP DHCP server, DHCP client Port Settings Enable/disable, link speed control, port isolation, PoE Management, EEE (802.3az) management, Port Mirroring L3 Features Static IPv4 routing, static IPv6 routing, DHCPv6 client, static IPv6 address QOS Port priority, DSCP priority, 802.1p priority, TOS Scheduling method SP/WFQ/WRR Bandwidth control Rate limiting, storm control RAM 128MB, DDR3 FLASH storage 16 MB serial flash Bandwidth (Non-blocking) 20 Gbps Packet buffer 512 KB MAC address table size 8K entries Jumbo frame support 10000 bytes Power Connector 2-pin industrial DC power socket Input voltage range 7 – 57 VDC (Power Supply not Included) PoE-out input voltage range 44 – 57 VDC Power consumption Idle: 3 W, Max: 8 W; PoE Max: 248 W Status LEDs 1 x Power LED, 1 x Aux LED, 16 x ETH status LEDs, 2 x SFP status LEDs Reset Software reset button Casing material Anodized aluminum housing and panels Dimensions (W x H x D) 132 x 44.2 x 122.2 mm Weight 610 g Mounting options Integrated DIN rail bracket, wall mounting (additional kit needed), flat surface placement Operating temperature -40 °C to 75 °C Operating humidity 10% to 90% non-condensing Ingress Protection Rating IP30 Regulatory CE, CB, RCM, FCC, IC, EAC, UCRF