Tycon Power Systems Tpdin-Monitor-Web3 Powersens Web Remote Monitor And Control

The TPDIN-Monitor-WEB3 Based Remote Monitor and Control System is a versatile IoT tool which enables the equipment designer and installer to remotely monitor their equipment and site. The unit can be accessed via the network (web and SNMP) to remotely monitor up to 4 voltages, 4 currents, 2 temperatures and control power to various equipment using 4 on-board relays.

In addition to the flexible interfaces mentioned above, the WEB3 interfaces with Tycon MPPT solar controllers using a single serial cable to read PV Volts, PV Amps, Battery Volts, Battery Amps, Battery Temperature, Load Volts and Load Amps from the MPPT solar controller. It also allows manual turn on/off of the MPPT solar controller load output via the web interface. This makes it very easy to monitor and control a remote power system remotely, log and graph the trends, send email alerts and control relay actions based on embedded sensor or MPPT data.

The system has built-in surge protection to prevent damage from electrical surges.

On board data-logging and graphing capabilities allow the user to see history of the various parameters being measured. The graphical interface allows the user to control relays via a single mouse click and monitor all the measurement parameters real-time via any web browser. The web interface allows access and control via desktops, laptops, tablets and smartphones. The Tycon APP for IOS and Android facilitates remote access.

The system allows control of the relays based on Voltage, Current, Temperature, Time, Ping Watchdog and MPPT controller data. This provides almost unlimited flexibility.

The relays have a special one-click cycle feature with programmable cycle times which can be used to turn a device off and then back on after the predetermined time with a single button click. This is useful for rebooting a device like a PoE Switch by power cycling it, thereby rebooting all devices attached to the switch. Relay CH1 and CH2 are Normally Closed type, Relay CH3 and CH4 are Normally Open type. Relays don’t use any power when they are in their default position. Details Manufacturer's Product Code TPDIN-Monitor-WEB3 Voltage Measurement (DC) V1, V2, V3, V4 = 0-80VDC Voltage Measurement Accuracy +/- 0.1V Current Measurement (DC) I1, I2 = 0.1A to 15A (20A Peak) using 12AWG Wire, I3 = +/-10A, I4 Supports External Current Shunts – Input Range +/-25mV Current Measurement Accuracy +/- 0.1A Common Mode Voltage Range -14V to +80V Temperature Measurement T1,T2 = -40C to 125C Temperature Measurement Type T2 = Embedded, T1 = External Sensor (included) Temperature Measurement Accuracy +/- 1 degC Relays CH1, CH2 (NC); CH3, CH4 (NO) = 10A 30VDC, 125-250VAC Relay Control CH1, CH2, CH3, CH4 = Manual or Automatic based on Volts, Amps, Temperature, Ping(5 secs Interval, 3 min Holdoff) or Time Power Requirements 10-57VDC Wire Terminal or 802.3af/at Class 0 PoE or 24V Passive PoE 1.5W All Relays Off, 3.5W All Relays On Accessibility Via Web Browser and SNMP Data-Logger FIFO, Max 4048 data sets, Programmable log interval Connections Removable Wire Terminal Wire Size 12AWG Max Mounting DIN Rail Operating Temperature -40C to +75C (-40F to 167F) Humidity (RH) 0% - 90% Dimensions (LxWxH) 125 x 102 x 46mm (4.9” x 4” x 1.8”) Weight 410g (14.5 oz) Certifications FCC and CE