Teltonika Trb256 Industrial M2m 4g/Lte Cat M1/Cat Nb1, Nb2/Egprs To Serial And I/O Cellular Gateway

Teltonika TRB256 Industrial M2M 4G/LTE Cat M1/Cat NB1, NB2/EGPRS to Serial and I/O Cellular Gateway.

The TRB256 is an industrial 4G LTE NB-IoT gateway designed to be applied to a broad range of IoT solutions. The device is equipped with multiple WAN interfaces, such as I/Os, RS232, RS485, and an Ethernet port, additionally boasting dual SIM functionality for continuous connectivity. This industrial-grade gateway also supports the 450 MHz frequency band, offering superior LTE signal penetration compared to standard frequencies, making it an optimal choice for a diverse range of M2M applications. Details Product code TRB256 Mobile module 4G LTE Cat M1 up to 588 DL/ 1119 UL kbps, Cat NB2 up to 127 DL/158.5 UL kbps, Cat NB1 up to 32 DL/70 UL kbps (simultaneous operation of cellular and GNSS connectivity is not supported) SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, on roaming, no network, network denied, data connection fail Status IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP Supported Bands 4G (LTE-FDD): Cat M1: B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B27, B28, B31, B66, B72, B73, B85; Cat NB2: B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B28, B31, B66, B72, B73, B85 GNSS GPS. (GLONASS, BeiDou, Galileo and QZSS - under development); (simultaneous operation of GNSS and cellular connectivity is not supported) CPU Mediatek, 580 MHz, MIPS 24KEc RAM 128 MB FLASH storage 16 MB RS232 Terminal block connector: TX, RX, RTS, CTS RS485 Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface) Serial functions Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client Input 3x Configurable Digital Inputs, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high, 1x Analog input (0 - 30 V) Output 3x Configurable Digital Outputs, Open collector output, max output 30 V, 300 mA Events Email, RMS, SMS I/O juggler Allows to set certain I/O conditions to initiate event Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL) Ethernet 1 x RJ45 port, 10/100 Mbps I/O’s 3 x Configurable digital I/O in 16-pin terminal block Status LEDs 3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LED SIM 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray Power 2 pin in 16-pin terminal block Antennas 1 x SMA connector for LTE, 1 x SMA connector for GNSS RS232 4-pin in 16-pin terminal block (TX, RX, RTS, CTS) RS485 4-pin in 16-pin terminal block (D+, D-, R+, R-) Reset Reboot/User default reset/Factory reset button Input voltage range 9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max Power consumption Idle: <2 W, Max: <3.5 W Casing material Aluminium housing Dimensions (W x H x D) 83 x 25 x 74.2 mm Weight 165 g Mounting options DIN rail, wall mount, flat surface (all require additional kit) Operating temperature -40 °C to 75 °C Operating humidity 10% to 90% non-condensing Ingress Protection Rating IP30 Regulatory CE, UKCA, EAC, RCM, CB, WEEE